News
Raw material belt equipment: production process of raw material belt equipment
Release time:
2021-02-22 12:30
Source:
Gb.lvhuanjx.com
Raw material belt equipmentWhat is the production process? Do you know? Today, let's learn about it together!
The raw tape is produced and processed step by step by the raw tape equipment. Different raw material belt production process is not the same, oil and oil-free raw material belt production process is not the same.
It looks complicated, but all we have to do is turn the switch on. Other maintenance work should be completed by professional technicians. A group of raw material belt equipment mainly includes mixer, oven, calender, drawing machine, rewinding machine, plastic sealing machine, injection molding machine and other machinery.
Raw material belt equipment is a plastic machine that produces raw material belt. It is not an independent machine. It combines different functions of machinery into a series of mechanical combinations. A set of raw material belt equipment needs about 6-100000 pieces. With a set of raw material belt equipment, you can enter the production process of raw material belt, so the raw material belt factory is relatively simple. The main material of the raw material belt is PTFE plastic, and the raw material is relatively cheap.
raw material with the production process of equipment:
1. Oil-bearing raw material belt.
Of course, can not add talcum powder, to use PTFE resin, plus extrusion additives, aviation kerosene, petroleum ether, white oil, aging, densification, extrusion, flattening, stretching, high temperature degreasing, cutting into the required size.
2. Oil-free raw material belt.
Process flow:
Resin and extrusion aid → uniform mixing → preforming → pushing → calendering → extraction → winding and trimming → packaging inspection
Processing route:
PTFE sealing tape is analyzed and processed by extrusion and drafting technology. After dispersion and resin prepressing, the raw material rod or flat belt extruded by the piston extruder is pressed into a thin belt on a two-roll calender, and then processed by the drafting system without removing the extrusion aid at all to obtain the raw material sealing belt.
The raw material belt is a waterproof material with a wide range of uses. From home decoration to engineering projects are used with raw material. Raw material tape is as common as transparent glue in the home, and we may use it at any time. Because of the large demand for raw material belt, raw material belt equipment market still has a lot of room for development.
The above is for you to introduceRaw material belt equipmentThe production process, I hope to help you!
Related News
Ptfe sealing tape productionline equipment: what are the molding equipment of raw material belt?
What are the molding equipment for the raw material belt? Do you know? Today, the raw material belt equipment manufacturers will introduce it to you! The equipment for forming raw material belt produced by raw material belt includes: raw material belt mixer, raw material belt pushing press, raw material belt calender, raw material belt coiler, and raw material belt mold.
The winding of the raw material belt has a great impact on the sealing in the future, so what are the problems that need to be paid attention to when the raw material belt is wound? Today, the raw material belt equipment manufacturer tells you about the matters needing attention when the raw material belt is wound.
Raw material belt equipment: production process of raw material belt equipment
What is the production process of raw material belt equipment? Do you know? Today, let's learn about it together! The raw tape is produced and processed step by step by the raw tape equipment. Different raw material belt production process is not the same, oil and oil-free raw material belt production process is not the same.
Raw material belt equipment: application of raw material belt equipment
At present, the winding of the raw material belt is manual operation, and there are few special tools. If it is only a maintenance method, basically manual winding is enough, but if a large number of projects are installed. If a building needs to be equipped with a faucet, it is conceivable that the winding of raw material tape alone is a lot of work. Today, I 'd like to introduce you to the raw material belt equipment.
The travel switch of the injection blow hollow molding machine is an important part of the production process of the injection blow hollow molding machine. The detailed knowledge list of the travel switch of the injection blow hollow molding machine brought by the editor today will help you understand. What is the stroke switch of injection blow hollow molding machine? Simply put, it is to use the collision between the moving parts of the injection blow hollow molding machine to produce the contact action of turning on or off the circuit to achieve the purpose of control.
What are the precautions for the use of injection blow hollow molding machine? Do you know? Today, let's learn about it together! 1, can not be operated in the state of no material, can reduce the wear between the screw and the cylinder. 2. For the screw, it is recommended to use IKv screw plastic injection blow hollow molding machine. Under the same conditions, the yield is higher and the plasticizing energy is stronger. When the temperature of the cylinder and the temperature of the plastic material are not enough, do not operate to prevent damage to the screws and connectors.
Contact Us
ADD：Plant A2, Zone B, Suzhou High-Tech Energy-Saving and Environmental Protection Innovation Park, No. 199, Fumin Middle Road, Tangqiao Town, Zhangjiagang City, Jiangsu Province, China.
Copyright © 2023 LVHUAN MACHINERY CO.,LTD
