News
Raw material belt equipment manufacturers tell you about the matters needing attention when winding raw material belt
Release time:
2021-02-24 14:18
Source:
Gb.lvhuanjx.com
The winding of the raw material tape has a great impact on the future sealing, so what problems should be paid attention to when winding the raw material tape? Today,Raw material belt equipmentThe manufacturer tells you about the matters needing attention when winding the raw material tape.
1, raw material belt equipment manufacturers suggest that the raw material belt needs to be wound in the direction of the thread, otherwise the sealing performance will be greatly reduced.
2. Do not wrap all threads on the raw material belt. In addition to preventing the raw material belt from entering the pipeline, it will also reduce the sealing performance. It is recommended to start winding the second silk tooth at the beginning of the line, and then leave the first silk tooth.
3. When winding the raw material tape, we need to control the force slightly to ensure that the raw material tape can be wound without being broken. The raw material tape wound in this way is tight and firm enough to ensure the sealing of the system.
4. As for the winding of the raw material belt several times, I believe the old master must have his own experience, but the raw material belt equipment manufacturer reminds everyone here to make the back part of the wound raw material belt thicker, that is, the front is thinner and the back is thicker, so as to ensure the thread is tighter and tighter and improve the sealing performance.
5. After the raw material belt is wound, once the threaded tube is tightened, do not draw the wire, otherwise it needs to be rewound and tightened.
What are the requirements for transportation of raw material belt:
Raw material belt equipment manufacturers suggest that cracks or scratches in PTFE raw material belt may sometimes be a problem with raw material belt equipment, but it may also be caused by improper storage or transportation. When the raw material belt joint is connected, the operation method does not meet the requirements, resulting in air leakage of the joint after installation. PTFE raw material with storage, transportation requirements of the correct approach. Transportation of pipe fittings and valves shall comply with the following provisions.
1. When handling, do not throw, fall, roll, or drag: When using mechanical equipment to lift straight pipes, non-metallic ropes must be used for lifting.
2. When transporting, it should be placed on a flat-bottomed car with a baffle or in a flat cabin. Stacking place should not damage or scratch the material with sharp objects. Should use non-metallic rope (belt) binding fixed, and should be sun protection.
3. When transporting pipe fittings and valves, they should be stacked neatly and firmly according to the box to prevent rain. Store in a well-ventilated shed, away from heat sources, and take sun protection and anti-corrosion measures. The raw material belt shall not be stacked or mixed with chemicals, and measures such as smokeless and no fire shall be taken in the reservoir area.
Above isRaw material belt equipmentThe manufacturer introduces the precautions and transportation requirements when winding the raw material tape for you, I hope it will be helpful to you!
Related News
Ptfe sealing tape productionline equipment: what are the molding equipment of raw material belt?
What are the molding equipment for the raw material belt? Do you know? Today, the raw material belt equipment manufacturers will introduce it to you! The equipment for forming raw material belt produced by raw material belt includes: raw material belt mixer, raw material belt pushing press, raw material belt calender, raw material belt coiler, and raw material belt mold.
The winding of the raw material belt has a great impact on the sealing in the future, so what are the problems that need to be paid attention to when the raw material belt is wound? Today, the raw material belt equipment manufacturer tells you about the matters needing attention when the raw material belt is wound.
Raw material belt equipment: production process of raw material belt equipment
What is the production process of raw material belt equipment? Do you know? Today, let's learn about it together! The raw tape is produced and processed step by step by the raw tape equipment. Different raw material belt production process is not the same, oil and oil-free raw material belt production process is not the same.
Raw material belt equipment: application of raw material belt equipment
At present, the winding of the raw material belt is manual operation, and there are few special tools. If it is only a maintenance method, basically manual winding is enough, but if a large number of projects are installed. If a building needs to be equipped with a faucet, it is conceivable that the winding of raw material tape alone is a lot of work. Today, I 'd like to introduce you to the raw material belt equipment.
The travel switch of the injection blow hollow molding machine is an important part of the production process of the injection blow hollow molding machine. The detailed knowledge list of the travel switch of the injection blow hollow molding machine brought by the editor today will help you understand. What is the stroke switch of injection blow hollow molding machine? Simply put, it is to use the collision between the moving parts of the injection blow hollow molding machine to produce the contact action of turning on or off the circuit to achieve the purpose of control.
What are the precautions for the use of injection blow hollow molding machine? Do you know? Today, let's learn about it together! 1, can not be operated in the state of no material, can reduce the wear between the screw and the cylinder. 2. For the screw, it is recommended to use IKv screw plastic injection blow hollow molding machine. Under the same conditions, the yield is higher and the plasticizing energy is stronger. When the temperature of the cylinder and the temperature of the plastic material are not enough, do not operate to prevent damage to the screws and connectors.
Contact Us
ADD：Plant A2, Zone B, Suzhou High-Tech Energy-Saving and Environmental Protection Innovation Park, No. 199, Fumin Middle Road, Tangqiao Town, Zhangjiagang City, Jiangsu Province, China.
Copyright © 2023 LVHUAN MACHINERY CO.,LTD
