News
Injection blow hollow molding machine: What are the precautions for the use of injection blow hollow molding machine?
Release time:
2021-02-06 10:00
Source:
Gb.lvhuanjx.com
Injection blow hollow forming machineWhat are the precautions for use? Do you know? Today, let's learn about it together!
1, can not be operated in the state of no material, can reduce the wear between the screw and the cylinder.
2. For the screw, it is recommended to use IKv screw plastic injection blow hollow molding machine. Under the same conditions, the yield is higher and the plasticizing energy is stronger. When the temperature of the cylinder and the temperature of the plastic material are not enough, do not operate to prevent damage to the screws and connectors.
3. When there is some abnormal sound in the injection blow hollow molding machine, stop the machine immediately to check the risk and investigate the safety problems.
4. Do not mix garbage, impurities or metals in the filter plate, which will increase the resistance of the extruder and affect the quantity and quality of the product.
5. If the resin pressure of the filter element is high, the filter element plate may be blocked, and the filter element needs to be replaced in time. If the resin pressure monitor or display device does not show abnormality, you can observe the change of the main motor current and the change of the extruded part to determine whether it needs to be replaced. If the injection blow hollow molding machine has not been used for a long time, please turn off the cooling water switch of the screw feed part and drain the cooling water.
Regularly calibrate the temperature controller to check its adjustment accuracy and control sensitivity.
7. Check the heater wiring and contactor, check the fixing device, and keep the heater and the cylinder in close contact
The matters needing attention in the maintenance and use of the injection blow hollow molding machine are shared here. The maintenance work and correct operation of the injection blow hollow molding machine can not only improve the production technology efficiency of the injection blow hollow molding machine, but also extend the time interval of the machine overhaul and reduce the overall economic operation control cost of the injection blow hollow molding machine.
The above is for you to introduceInjection blow hollow forming machinePrecautions for use, I hope to help you!
Related News
Ptfe sealing tape productionline equipment: what are the molding equipment of raw material belt?
What are the molding equipment for the raw material belt? Do you know? Today, the raw material belt equipment manufacturers will introduce it to you! The equipment for forming raw material belt produced by raw material belt includes: raw material belt mixer, raw material belt pushing press, raw material belt calender, raw material belt coiler, and raw material belt mold.
The winding of the raw material belt has a great impact on the sealing in the future, so what are the problems that need to be paid attention to when the raw material belt is wound? Today, the raw material belt equipment manufacturer tells you about the matters needing attention when the raw material belt is wound.
Raw material belt equipment: production process of raw material belt equipment
What is the production process of raw material belt equipment? Do you know? Today, let's learn about it together! The raw tape is produced and processed step by step by the raw tape equipment. Different raw material belt production process is not the same, oil and oil-free raw material belt production process is not the same.
Raw material belt equipment: application of raw material belt equipment
At present, the winding of the raw material belt is manual operation, and there are few special tools. If it is only a maintenance method, basically manual winding is enough, but if a large number of projects are installed. If a building needs to be equipped with a faucet, it is conceivable that the winding of raw material tape alone is a lot of work. Today, I 'd like to introduce you to the raw material belt equipment.
The travel switch of the injection blow hollow molding machine is an important part of the production process of the injection blow hollow molding machine. The detailed knowledge list of the travel switch of the injection blow hollow molding machine brought by the editor today will help you understand. What is the stroke switch of injection blow hollow molding machine? Simply put, it is to use the collision between the moving parts of the injection blow hollow molding machine to produce the contact action of turning on or off the circuit to achieve the purpose of control.
What are the precautions for the use of injection blow hollow molding machine? Do you know? Today, let's learn about it together! 1, can not be operated in the state of no material, can reduce the wear between the screw and the cylinder. 2. For the screw, it is recommended to use IKv screw plastic injection blow hollow molding machine. Under the same conditions, the yield is higher and the plasticizing energy is stronger. When the temperature of the cylinder and the temperature of the plastic material are not enough, do not operate to prevent damage to the screws and connectors.
Contact Us
ADD：Plant A2, Zone B, Suzhou High-Tech Energy-Saving and Environmental Protection Innovation Park, No. 199, Fumin Middle Road, Tangqiao Town, Zhangjiagang City, Jiangsu Province, China.
Copyright © 2023 LVHUAN MACHINERY CO.,LTD
